SURECAN FAQ's

The SureCan fuel can releases fuel at an average rate of about 2 gallons per minute. For optimal performance, rotate the nozzle 180 degrees downward from its resting position.

Yes, SureCan products are available in various countries, including Canada and Australia. If you are interested in becoming an international dealer, please fill out the form at the provided link.

No, SureCan does not use the new safety nozzles that are often difficult to operate. Instead, SureCan features a rotating spout at the bottom of the can and a thumb control button on top, eliminating the need for hard-to-use nozzles. Additionally, SureCan's vent is located beneath the thumb control button, which vents and opens the valve simultaneously when pressed.

The SureCan is intended for gasoline, diesel, and kerosene fuel liquids and not intended for use with methanol. The material we have on the inside of our fuel cans is made of high quality nylon with Viton seals that are rated for the use of fuel and not methanol. Using methanol in your SureCan for a long period of time will result in a reduced flow rate.

Yes. In of May, 2022 SureCan passed the FM Approval to become a Type II Safety Can, and is legal in California.

See for yourself, watch our durability comparison video below! We only put the best materials in our products. The SureCan is made out of High Density Polyetholyne plastic (HDPE), and has 6 individual layers in the tank wall which makes it the most durable plastic fuel can available today!

SureCan fuel cans are intended for gasoline, diesel, and kerosene fuel liquids and not intended for use with water. SureCan does have Water specific use containers called the Utility SureCan with Spigot. These are intended to be used with water and other liquids for easy to use portable dispencing.

Yes. Shipping rate vary based on shipping destination. We do also have various dealers throughout Canada.

To become an Authorized Dealer for SureCan you will need to go to our Dealer Registration page and fill out the following form. Filling out the form does not automatically authorize you as a SureCan dealer, one of our representatives will be in touch with you shortly. Click below to fill out our dealer application.

To have your store(s) placed on our Store Locator you must first register as an Authorized Dealer. You will need to go to our Dealer Registration page and fill out the form. Once you have been approved as an Authorized Dealer please fill out the Store Locator request form at the link below.

A Safety Can is a container designed to store and transport flammable liquids and is built with special materials and features such as vents, flame arrestors, and spillproof caps. Built with high-quality materials, these cans feature essential safety mechanisms such as venting systems to prevent pressure buildup, flame arrestors to stop ignition, and spill-proof caps for added security. ​ SureCan Safety Cans go beyond industry standards, proudly meeting all OSHA, MSHA, and NFPA certifications, along with additional approvals from DOT, UN and FM. Engineered for both homeowners and professionals, SureCan combines safety, durability, and ease of use, making it the ultimate solution for handling fuel. Whether you're fueling up equipment at home or managing job site needs, SureCan delivers the best and safest experience you'll ever have with a fuel can.

Yes, SureCan Safety Cans meet OSHA and MSHA standard guidelines. They are also FM Approved (6051-6052) as Safety Cans, ensuring they adhere to stringent safety standards.

We would like to make the following statement in regards to Proposition 65. To the best of our knowledge, there are no Proposition 65 chemicals present in this product at levels that would require warning under the California Safe Drinking Water and Toxic Enforcement Act.

Yes, SureCan Type II Safety Cans are DOT approved. This means that it meets safety standards set by the U.S. Department of Transportation, Signifying that it has specific design features to safely transport flammable liqauids like gasoline.

No. SureCan's thumb safety trigger securely seals the vent on top of the can. The thumb button assembly is made up of two main parts, the thumb button itself and the safety trigger. The vent does not open or release any air unless the safety trigger is pulled straight back and then depressed down with the main thumb button.

Yes! The Utility SureCan w/ Spigot and the Utility Transfer Tank is BPA Free and can be used for potable drinking water.

Our Multipurpose Utility Tank was designed for use with many differnent types of liquids that include but are not limited to, Diesel Exhause Fluid (DEF), windshield wiper fluid, water, coolant, etc. It comes built with our 9" blue rotating spout and makes it easy to access many different types of fill resevours. Our Utility SureCan w/ Spigot was designed primiarly for convenience in dispensing water. The main difference from our Utility Tank is that it comes built with a Spigot in place of the blue spout. The Utility Spigot end can be removed and also used for other liquids such as DEF, coolant, and wiper fluid.

Remove the Utility Tank’s factory spout using a wrench. Grab spout elbow, twist, and pull assembly away from the body of the Lubricate o-rings with water on new assembly. Insert the end of the Spigot attachment into the valve opening, (NOTE: Press straight into the valve opening until fully seated). Hand tighten nut (careful not to overtighten or cross threads).SureCanUSA | Best Gas Can Use thin black Velcro to strap thumb button down on the handle. Rotate Spigot attachment down into desired position When ready lift spigot lever to dispense water. (Apply additonal Velcro to the side of the Utiliity Can for mounting optional soap dispenser. Soap dispenser not included.)

The Utility SureCan products are intended for non-fuel based liquids such as, but not limited to: Water Wiper Fluid Coolant Diesel Exhaust Fluidetc (DEF). The SureCan Utility products are not intended for use with gasoline, diesel, kerosene, or any other fuel-based product. Use with fuel based liquids will void your product warranty.

SureCan's replacement spout fits on any size can 2.2 Gallon or 5 Gallon. It is easy to replace and install. Please follow the instructions below on how to properly replace your Spout Assembly 1. Pry locking pin up w/ small screwdriver (Carful not to damage the can wall). 2. Loosen the nut. 3. Grab spout elbow, twist, and pull assembly away from the body of the can. 4. Lubricate O-rings on the new assembly. 5. Insert the end of the spout assembly into the valve opening. (NOTE: Press strait into the valve opening until fully seated) 6. Hand Tighten nut and then wrench tighten until the pin reaches the 1 O'clock position, (careful not to over tighten or cross threads.) 7. Press locking pin down. Watch the Replacment Video

Remove the Utility Tank’s factory spout using a wrench. Grab spout elbow, twist, and pull assembly away from the body of the Lubricate o-rings with water on new assembly. Insert the end of the Spigot attachment into the valve opening, (NOTE: Press straight into the valve opening until fully seated). Hand tighten nut (careful not to overtighten or cross threads).SureCanUSA | Best Gas Can Use thin black Velcro to strap thumb button down on the handle. Rotate Spigot attachment down into desired position When ready lift spigot lever to dispense water. (Apply additonal Velcro to the side of the Utiliity Can for mounting optional soap dispenser. Soap dispenser not included.)

SureCan's replacement spout fits on any size can 5 Gallon Can and is easy to replace and install. Please follow the instructions below on how to properly replace your 5 Gallon Spout Cap and Tether 1. Snip off the old tether with diagonal cutters or similar tool. 2. Make a lead angle in the tether hole (on the can) for the new tether with a set punch. 3. Press the new tether assembly into the hole on the can.

Yes, Replacement parts are available for purchase on our website for all fuel cans and utility cans, please visit the links below to go to the replacement parts page. Fuel Can Parts > Utlity Can Parts >

SureCan's replacement spout fits on any size can 2+ Gallon Can and is easy to replace and install. Please follow the instructions below on how to properly replace your 2.2 Gallon Spout Cap and Tether 1. Snip off the old tether with diagonal cutters or similar tool. 2. Make a lead angle in the tether hole (on the can) for the new tether with a set punch. 3. Press the new tether assembly into the hole on the can.

SureCan's replacement Thumb Button Assembly fits on any size can 2.2 Gallon or 5 Gallon and is easy to replace and install. Please follow the instructions below on how to properly replace your Thumb Button Assembly 1. Remove old rivet pins w/ diagonal hand cutters, CAUTION: Do not use power tools near fuel cans during replacement assembly. NOTE: May be necessary to cut away at the plastic portion of the thumb button to get to the rivets 2. Position thumb button assembly over pivot hole. 3. Insert #10 machine screw through thumb button spring and pivot hole of the can. 4. Insert second #10 machine screw through thumb button and lift rod hole. 5. Tighten #10 nuts onto the screws until the screw is flush with the nut. Watch the Replacment Video

Yes, all SureCan fuel cans and utility can products come with a limited 3-year manufacturer warranty. You can review the full warranty details on our website.

We stand by our products! For warranty questions please call customer service at 801-827-0500 or email us at warranty@surecanusa.com. We recommend that you have your product near your or have the date stamp information to provide when you call. For Warranty Claims: Submit below, please be as descriptive as possible in your message. Information from your product is required.

The date stamp on every SureCan product is located on the can behind the spout when it is in the up resting position. To help locate your stamp rotate the spout down 90 degrees to gain a better view of the can. The number in the middle signifies the year and the number the arrow is pointing to is the month it was manufactured in. This date stamp will be requested with all Warranty Claims. View the image below for reference.